Chapter 27 Advertisement Screen
ZyWALL/USG Series User’s Guide
507
27.1.1 Adding/Editing an Advertisement URL
Click Configuration > Hotspot > Advertisement and then the Add (or Edit) icon in the
Advertisement Summary section to open the Add/Edit Advertisement URL screen. Use this
screen to configure an advertisement address entry.
Note: You can create up to 20 advertisement URL entries. The ZyWALL/USG randomly
picks one and open the specified web site in a new frame when an authenticated
user is attempts to access the Internet.
Figure 356 Configuration > Hotspot > Advertisement > Add/Edit
The following table gives an overview of the objects you can configure.
Name This field displays the descriptive name of web site.
URL This field displays the address of web site.
Hotspot License
Status
License
Status
This field displays whether the service is activated (Licensed) or not (Not Licensed).
License Type This shows whether you have a trial or standard license or none (Trial, Standard, None).
Expiration
Date
This shows when your hotspot license will expire.
Apply Click this button to save your changes to the ZyWALL/USG.
Reset Click this button to return the screen to its last-saved settings.
Table 192 Configuration > Hotspot > Advertisement (continued)
LABEL DESCRIPTION
Table 193 Configuration > Hotspot > Advertisement > Add/Edit
LABEL DESCRIPTION
Name Enter a descriptive name for the advertisement web site.
You can use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and underscores (_). Spaces
are not allowed. The first character must be a letter.
URL Enter the URL or IP address of the web site.
Use “http://” followed by up to 262 characters (0-9a-zA-Z;/?:@&=+$\.-_!~*'()%). For
example, http://www.example.com or http://172.16.1.35.
Preview Click this button to open the specified web site in a new frame.
OK Click OK to save your changes back to the ZyWALL/USG.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
