Chapter 13 NAT
ZyWALL/USG Series User’s Guide
390
13.2.1 The NAT Add/Edit Screen
The NAT Add/Edit screen lets you create new NAT rules and edit existing ones. To open this
window, open the NAT summary screen. (See Section 13.2 on page 388.) Then, click on an Add
icon or Edit icon to open the following screen.
Figure 270 Configuration > Network > NAT > Add
The following table describes the labels in this screen.
Apply Click this button to save your changes to the ZyWALL/USG.
Reset Click this button to return the screen to its last-saved settings.
Table 144 Configuration > Network > NAT (continued)
LABEL DESCRIPTION
Table 145 Configuration > Network > NAT > Add
LABEL DESCRIPTION
Create new Object Use to configure any new settings objects that you need to use in this screen.
Enable Rule Use this option to turn the NAT rule on or off.
Rule Name Type in the name of the NAT rule. The name is used to refer to the NAT rule. You may
use 1-31 alphanumeric characters, underscores(
_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive.
To Next Page
Loading...
