Chapter 44 Log and Report
ZyWALL/USG Series User’s Guide
880
to the specific destinations. You can also have the ZyWALL/USG store system logs on a connected
USB storage device. The other four logs are stored on specified syslog servers.
The Log Setting screens control what information the ZyWALL/USG saves in each log. You can also
specify which log messages to e-mail for the system log, and where and how often to e-mail them.
These screens also set for which events to generate alerts and where to email the alerts.
The first Log Setting screen provides a settings summary. Use the Edit screens to configure
settings such as log categories, e-mail addresses, and server names for any log. Use the Log
Category Settings screen to edit what information is included in the system log, USB storage, e-
mail profiles, and remote servers.
44.3.1 Log Setting Summary
To access this screen, click Configuration > Log & Report > Log Setting.
Figure 624 Configuration > Log & Report > Log Setting
The following table describes the labels in this screen.
Table 374 Configuration > Log & Report > Log Setting
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where you can modify it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific log.
Name This field displays the type of log setting entry (system log, logs stored on a USB storage
device connected to the ZyWALL/USG, or one of the remote servers).
To Next Page
Loading...
