ZyXEL Communications VPN Series - Add;Edit Dhcpv6 Request;Release Options; Add;Edit DHCP Extended Options

Chapter 10 Interfaces
ZyWALL/USG Series User’s Guide
287
The following table describes labels that can appear in this screen.
10.3.5 Add/Edit DHCPv6 Request/Release Options
When you configure an interface as a DHCPv6 server or client, you can additionally add DHCPv6
request or lease options which have the ZyWALL/USG to add more information in the DHCPv6
packets. To open the screen, click Configuration > Network > Interface > Ethernet > Edit,
select DHCPv6 Server or DHCPv6 Client in the DHCPv6 Setting section, and then click Add in
the DHCPv6 Request Options or DHCPv6 Lease Options table.
Figure 220 Configuration > Network > Interface > Ethernet > Edit > Add DHCPv6 Request/Lease
Options
Select a DHCPv6 request or lease object in the
Select one object field and click OK to save it.
Click Cancel to exit without saving the setting.
10.3.6 Add/Edit DHCP Extended Options
When you configure an interface as a DHCPv4 server, you can additionally add DHCP extended
options which have the ZyWALL/USG to add more information in the DHCP packets. The available
fields vary depending on the DHCP option you select in this screen. To open the screen, click
Configuration > Network > Interface > Ethernet > Edit, select DHCP Server in the DHCP
Setting section, and then click Add or Edit in the Extended Options table.
Table 102 Object References
LABEL DESCRIPTION
Object Name This identifies the object for which the configuration settings that use it are displayed.
Click the object’s name to display the object’s configuration screen in the main window.
# This field is a sequential value, and it is not associated with any entry.
Service This is the type of setting that references the selected object. Click a service’s name to
display the service’s configuration screen in the main window.
Priority If it is applicable, this field lists the referencing configuration item’s position in its list,
otherwise N/A displays.
Name This field identifies the configuration item that references the object.
Description If the referencing configuration item has a description configured, it displays here.
Refresh Click this to update the information in this screen.
Cancel Click Cancel to close the screen.