Chapter 42 Object
ZyWALL/USG Series User’s Guide
805
Figure 555 Configuration > Object > Certificate > My Certificates > Import
The following table describes the labels in this screen.
42.11.4 The Trusted Certificates Screen
Click Configuration > Object > Certificate > Trusted Certificates to open the Trusted
Certificates screen. This screen displays a summary list of certificates that you have set the
ZyWALL/USG to accept as trusted. The ZyWALL/USG also accepts any valid certificate signed by a
certificate on this list as being trustworthy; thus you do not need to import any certificate that is
signed by one of these certificates.
Figure 556 Configuration > Object > Certificate > Trusted Certificates
Table 332 Configuration > Object > Certificate > My Certificates > Import
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse to find it.
You cannot import a certificate with the same name as a certificate that is already in the
ZyWALL/USG.
Browse Click Browse to find the certificate file you want to upload.
Password This field only applies when you import a binary PKCS#12 format file. Type the file’s password
that was created when the PKCS #12 file was exported.
OK Click OK to save the certificate on the ZyWALL/USG.
Cancel Click Cancel to quit and return to the My Certificates screen.
To Next Page
Loading...
