Chapter 4 Easy Mode
ZyWALL/USG Series User’s Guide
75
Click the settings icon to manage clients. Click + to add a new network client. In the pop-up
screen, you can add a new client by entering its interface (LAN1 or Guest), IP Address, MAC
Address and Name.
This is the information you see under Network Client:
• LAN information on wired and wireless connections to the ZyWALL/USG
• Guest Network information on guest wired and wireless connections to the ZyWALL/USG
• Wi-Fi button to change Wi-Fi channel
• Guest button turn the guest wireless network off or on.
4.2 Initial Setup Wizard Screen 1 - Language and Overview
Figure 54 Initial Setup Wizard 1
To Next Page
Loading...
