Chapter 3 Hardware, Interfaces and Zones
ZyWALL/USG Series User’s Guide
70
3.4 Stopping the ZyWALL/USG
Always use Maintenance > Shutdown > Shutdown or the shutdown command before you turn
off the ZyWALL/USG or remove the power. Not doing so can cause the firmware to become corrupt.
Table 19 Default Zone - Interface Mapping USG2200-VPN
ZONE / INTERFACE WAN LAN1 LAN2 DMZ 10G
NO
DEFAULT
ZONE
• USG2200-VPN
GE5, GE5_PPP
GE6, GE6_PPP
GE7 GE8 GE9, GE10 TE17,
TE17_PPP
TE18,
TE18_PPP
GE1, GE1_PPP
GE2, GE2_PPP
GE3, GE3_PPP
GE4, GE4_PPP
GE7_PPP
GE8_PPP
GE9_PPP
GE10_PPP
GE11,
GE11_PPP
GE12,
GE12_PPP
GE13,
GE13_PPP
GE14,
GE14_PPP
GE15,
GE15_PPP
GE16,
GE16_PPP