ZyXEL Communications VPN Series - Add Printer Rule; Edit Printer Rule

Chapter 22 Printer Manager
ZyWALL/USG Series User’s Guide
484
22.2.1 Add Printer Rule
Click the Add icon to open the following screen. Use this screen to add a new printer.
Figure 337 Configuration > Hotspot > Printer Manager > General: Add
The following table describes the labels in this screen.
22.2.2 Edit Printer Rule
Select an entry in the Printer Manager > General screen and click the Edit icon to open the
following screen. Use this screen to modify the printer’s settings. You can't click the Edit icon when
the printer status is sync fail or sync progressing.
Figure 338 Configuration > Hotspot > Printer Manager > General: Edit
Table 177 Configuration > Hotspot > Printer Manager > General: Add
LABEL DESCRIPTION
Enable Printer
Manager
Select this option to turn on this entry in order to allow the ZyWALL/USG to manage this
printer.
IPv4 Address Enter an IPv4 address for the printer.
Description Enter a description of this printer. You can use alphanumeric and
()+,/:=?!*#@$_%-”
characters, and it can be up to 60 characters long.
OK Click OK to save your changes back to the ZyWALL/USG.
Cancel Click Cancel to exit this screen without saving.