Chapter 26 Walled Garden
ZyWALL/USG Series User’s Guide
501
The following table describes the labels in this screen.
26.3 URL Base Screen
Use this screen to configure the walled garden web addresses (URLs that use the HTTP or HTTPS
protocol) for web sites that all users are allowed to access without logging in. The web site link(s)
displays in the user login screen by default.
Click Configuration > Hotspot > Walled Garden and then select the URL Base tab to display
the screen.
Figure 350 Configuration > Hotspot > Walled Garden: URL Base
The following table describes the labels in this screen.
Table 187 Configuration > Hotspot > Walled Garden: General
LABEL DESCRIPTION
Enable Walled
Garden
Select this to turn on the walled garden feature.
Note: This feature works only with the web portal authentication type.
Hotspot License
Status
License
Status
This field displays whether the service is activated (Licensed) or not (Not Licensed).
License Type This shows whether you have a trial or standard license or none (Trial, Standard, None).
Expiration
Date
This shows when your hotspot license will expire.
Apply Click this button to save your changes to the ZyWALL/USG.
Reset Click this button to return the screen to its last-saved settings.
Table 188 Configuration > Hotspot > Walled Garden: URL Based
LABEL DESCRIPTION
Walled Garden
URL List
Use this table to manage the list of walled garden web site links.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
To Next Page
Loading...
