Chapter 40 SSL Inspection
ZyWALL/USG Series User’s Guide
704
40.4 Certificate Update Screen
Use this screen to update the latest certificates of servers using SSL connections to the ZyWALL/
USG network. User U sends an SSL request to destination server D (1), via the ZyWALL/USG, Z . D
replies (2); Z intercepts the response from D and checks if the certificate has been previously
signed. Z then replies to D (3) and also to U (4). D’s latest certificate is stored at myZyXEL.com
(M) along with other server certificates and can be downloaded to the ZyWALL/USG.
Figure 480 SSL Inspection Certificate Update Overview
Click Configuration > UTM Profile > SSL Inspection > Certificate Update to display the
following screen.
Figure 481 Configuration > UTM Profile > SSL Inspection > Certificate Update
The following table describes the fields in this screen.
Table 273 Configuration > UTM Profile > SSL Inspection > Certificate Update
LABEL DESCRIPTION
Certificate Information
Current Version This displays the current certificate set version.
Certificate Update You should have Internet access and have activated SSL Inspection on the
ZyWALL/USG at myZyXEL.com.
To Next Page
Loading...
