ZyXEL Communications VPN Series - Example: Configure Zywall;Usg for Secuextender

Chapter 30 SSL VPN
ZyWALL/USG Series User’s Guide
578
The following table describes the labels in this screen.
30.4.1 Example: Configure ZyWALL/USG for SecuExtender
Make these configurations on the ZyWALL/USG to allow the remote user to access resources behind
the ZyWALL/USG using SecuExtender. These steps can be performed in any order.
1 Create a user that can log into the ZyWALL/USG. Using the ZyWALL/USG web configurator, go to
Configuration > Object > User > Add and substitute your information for the information shown
in the following example.
Figure 397 Create a User
2 Next create an SSL VPN Access Privilege policy substituting your information for the information
shown in the following example. Using the ZyWALL/USG web configurator, go to Configuration >
VPN > SSL VPN > Access Privilege > Add.
Table 221 Configuration > VPN > SSL VPN > SecuExtender
LABEL DESCRIPTION
Latest Version This displays the latest version of the ZyWALL/USG Security SecuExtender that
is available.
Current Version This displays the current version of SecuExtender that is installed in the
ZyWALL/USG.
Note: You need to register first at portal.myzyxel.com to download the latest version of
SecuExtender.
Update Now The ZyWALL/USG periodically checks if there’s a later version of SecuExtender at
the portal. The Update Now button is enabled when thre is.Click Update Now
to get the latest version of SecuExtender.