Chapter 42 Object
ZyWALL/USG Series User’s Guide
778
Figure 534 Configuration > Object > Service > Service Group > Edit
The following table describes the labels in this screen.
42.8 Schedule Overview
Use schedules to set up one-time and recurring schedules for policy routes, security policies,
application patrol, and content filtering. The ZyWALL/USG supports one-time and recurring
schedules. One-time schedules are effective only once, while recurring schedules usually repeat.
Both types of schedules are based on the current date and time in the ZyWALL/USG.
Note: Schedules are based on the ZyWALL/USG’s current date and time.
•Use the Schedule summary screen (Section 42.8.2 on page 779) to see a list of all schedules in
the ZyWALL/USG.
Table 317 Configuration > Object > Service > Service Group > Edit
LABEL DESCRIPTION
Name Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Description Enter a description of the service group, if any. You can use up to 60 printable ASCII
characters.
Member List The Member list displays the names of the service and service group objects that have
been added to the service group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
OK Click OK to save your changes back to the ZyWALL/USG.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
