ZyWALL/USG Series User’s Guide
506
CHAPTER 27
Advertisement Screen
27.1 Advertisement Overview
Use this screen to set the ZyWALL/USG to display an advertisement web page as the first web page
whenever the user connects to the Internet.
Click Configuration > Hotspot > Advertisement to display the screen.
Figure 355 Configuration > Hotspot > Advertisement
The following table gives an overview of the objects you can configure.
Table 192 Configuration > Hotspot > Advertisement
LABEL DESCRIPTION
Enable
Advertisement
Select this to turn on the advertisement feature.
Note: This feature works only when you enable web authentication.
Advertisement
Summary
Use this table to manage the list of advertisement web pages.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
# This field is a sequential value, and it is not associated with any entry.
To Next Page
Loading...
