Chapter 31 SSL User Screens
ZyWALL/USG Series User’s Guide
582
• Using RDP requires Internet Explorer
• Sun’s Runtime Environment (JRE) version 1.6 or later installed and enabled.
Required Information
A remote user needs the following information from the network administrator to log in and access
network resources.
• the domain name or IP address of the ZyWALL/USG
• the login account user name and password
• if also required, the user name and/or password to access the network resource
Certificates
The remote user’s computer establishes an HTTPS connection to the ZyWALL/USG to access the
login screen. If instructed by your network administrator, you must install or import a certificate
(provided by the ZyWALL/USG or your network administrator).
Finding Out More
See Chapter 30 on page 570 for how to configure SSL VPN on the ZyWALL/USG.
31.2 Remote SSL User Login
This section shows you how to access and log into the network through the ZyWALL/USG. Example
screens for Internet Explorer are shown.
1 Open a web browser and enter the web site address or IP address of the ZyWALL/USG. For
example, “http://sslvpn.mycompany.com”.
Figure 401 Enter the Address in a Web Browser
2 Click OK or Yes if a security screen displays.
To Next Page
Loading...
