ZyXEL Communications VPN Series - Authentication Method Objects

Chapter 42 Object
ZyWALL/USG Series User’s Guide
793
1 Access the Configuration > VPN > IPSec VPN > VPN Gateway > Edit screen.
2 Click Show Advance Setting and select Enable Extended Authentication.
3 Select Server Mode and select an authentication method object from the drop-down list box.
4 Click OK to save the settings.
Figure 547 Example: Using Authentication Method in VPN
42.10.3 Authentication Method Objects
Click Configuration > Object > Auth. Method to display the screen as shown.
Note: You can create up to 16 authentication method objects.
Figure 548 Configuration > Object > Auth. Method
The following table describes the labels in this screen.
Table 327 Configuration > Object > Auth. Method
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry.
# This field displays the index number.
Method Name This field displays a descriptive name for identification purposes.
Method List This field displays the authentication method(s) for this entry.