Chapter 19 DNS Inbound LB
ZyWALL/USG Series User’s Guide
428
•Use the Inbound LB Add/Edit screen (see Section 19.2.1 on page 429) to add or edit a DNS
load balancing rule.
19.2 The DNS Inbound LB Screen
The Inbound LB screen provides a summary of all DNS load balancing rules and the details. You
can also use this screen to add, edit, or remove the rules. Click Configuration > Network >
Inbound LB to open the following screen.
Note: After you finish the inbound load balancing settings, go to security policy and NAT
screens to configure the corresponding rule and virtual server to allow the Internet
users to access your internal servers.
Figure 303 Configuration > Network > DNS Inbound LB
The following table describes the labels in this screen.
Table 157 Configuration > Network > DNS Inbound LB
LABEL DESCRIPTION
Global Setting
Enable DNS Load
Balancing
Select this to enable DNS load balancing.
Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can
modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL/USG confirms you
want to remove it before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Move To move an entry to a different number in the list, click the Move icon. In the field
that appears, specify the number to which you want to move the entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Priority This field displays the order in which the ZyWALL/USG checks the member
interfaces of this DNS load balancing rule.
Query Domain Name This field displays the domain name for which the ZyWALL/USG manages load
balancing between the specified interfaces.
To Next Page
Loading...
