ZyXEL Communications VPN Series - Configuration Menu

Chapter 1 Introduction
ZyWALL/USG Series User’s Guide
38
Configuration Menu
Use the configuration menu screens to configure the ZyWALL/USG’s features.
AppPatrol AppPatrol
Statistics
Displays application patrol statistics.
Content Filter Report Collect and display content filter statistics
IDP IDP Collect and display statistics on the intrusions that the ZyWALL/USG has
detected.
Anti-Virus Anti-Virus Collect and display statistics on the viruses that the ZyWALL/USG has
detected.
Anti-Spam Report Collect and display spam statistics.
Status Displays how many mail sessions the ZyWALL is currently checking and
DNSBL (Domain Name Service-based spam Black List) statistics.
SSL Inspection Report Collect and display SSL Inspection statistics.
Certificate
Cache List
Displays traffic to destination servers using certificates.
Log View Log Lists log entries.
View AP Log Lists AP log entries.
Dynamic
Users Log
Display the ZyWALL/USG’s dynamic guest account log messages.
Table 7 Configuration Menu Screens Summary
FOLDER OR LINK TAB FUNCTION
Quick Setup Quickly configure WAN interfaces or VPN connections.
Licensing
Registration Registration Register the device and activate trial services.
Service View the licensed service status and upgrade licensed services.
Signature
Update
Anti-Virus Update anti-virus signatures immediately or by a schedule.
IDP/AppPatrol Update IDP signatures immediately or by a schedule.
Wireless
Controller Configuration Configure manual or automatic controller registration.
AP
Management
Mgnt AP List Edit or remove entries in the lists of APs managed by the ZyWALL/
USG.
AP Policy Configure the AP controller’s IP address on the managed APs and
determine the action the managed APs take if the current AP
controller fails.
MON Mode Rogue/Friendly AP
List
Configure how the ZyWALL/USG monitors rogue APs.
Load Balancing Load Balancing Configure load balancing for traffic moving to and from wireless
clients.
DCS DCS Configure dynamic wireless channel selection.
Auto Healing Auto Healing Enable auto healing to extend the wireless service coverage area of
the managed APs when one of the APs fails.
Network
Table 6 Monitor Menu Screens Summary (continued)
FOLDER OR LINK TAB FUNCTION