ZyXEL Communications VPN Series - Page 39

Chapter 1 Introduction
ZyWALL/USG Series User’s Guide
39
Interface Port Role Use this screen to set the ZyWALL/USG’s flexible ports such as
LAN, OPT, WLAN, or DMZ.
Ethernet Manage Ethernet interfaces and virtual Ethernet interfaces.
PPP Create and manage PPPoE and PPTP interfaces.
Cellular Configure a cellular Internet connection for an installed mobile
broadband card.
Tunnel Configure tunneling between IPv4 and IPv6 networks.
VLAN Create and manage VLAN interfaces and virtual VLAN interfaces.
Bridge Create and manage bridges and virtual bridge interfaces.
Trunk Create and manage trunks (groups of interfaces) for load
balancing.
Routing Policy Route Create and manage routing policies.
Static Route Create and manage IP static routing information.
RIP Configure device-level RIP settings.
OSPF Configure device-level OSPF settings, including areas and virtual
links.
DDNS DDNS Define and manage the ZyWALL/USG’s DDNS domain names.
NAT NAT Set up and manage port forwarding rules.
Redirect
Service
Redirect Service Set up and manage HTTP and SMTP redirection rules.
ALG ALG Configure SIP, H.323, and FTP pass-through settings.
UPnP UPnP Configure interfaces that allow UPnP and NAT-PMP connections.
IP/MAC
Binding
Summary Configure IP to MAC address bindings for devices connected to
each supported interface.
Exempt List Configure ranges of IP addresses to which the ZyWALL/USG does
not apply IP/MAC binding.
Layer 2
Isolation
General Enable layer-2 isolation on the ZyWALL/USG and the internal
interface(s).
White List Enable and configure the white list.
DNS Inbound
LB
DNS Load
Balancing
Configure DNS Load Balancing.
Web
Authentication
Web Authentication Define a web portal and exempt services from authentication.
SSO Configure the ZyWALL/USG to work with a Single Sign On agent.
Hotspot
Billing General Configure the general billing settings, such as the accounting
method.
Billing Profile Configure the billing profiles for the web-based account generator
and each button on the connected statement printer.
Discount Configure discount price plans.
Payment Service Enable online payment service and configure the service pages.
Printer
Manager
General Setting Configure the printer list, enable printer management and
customize the account printout.
Printer Manager Detect the connected statement printers, change their IP
addresses and/or add them to the managed printer list.
Table 7 Configuration Menu Screens Summary (continued)
FOLDER OR LINK TAB FUNCTION