Chapter 7 Monitor
ZyWALL/USG Series User’s Guide
206
7.15.3 Config AP
Select an AP and click the Config AP button in the Monitor > Wireless > AP List table to display
this screen.
Figure 170 Monitor > Wireless > AP List > Config AP
Each field is described in the following table.
Table 61 Monitor > Wireless > AP List > Config AP
LABEL DESCRIPTION
Create new Object Use this menu to create a new Radio Profile object to associate with this AP.
MAC This displays the MAC address of the selected AP.
Model This field displays the AP’s hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the ZyWALL/USG and the information is
unavailable as a result.
Description Enter a description for this AP. You can use up to 31 characters, spaces and underscores
allowed.
Group Setting Select an AP group to which you want this AP to belong.
Radio 1/2 Setting
Override Group
Radio Setting
Select this option to overwrite the AP radio settings with the settings you configure
here.
To Next Page
Loading...
