ZyXEL Communications VPN Series - Page 205

Chapter 7 Monitor
ZyWALL/USG Series User’s Guide
205
The following table describes the labels in this screen.
Table 60 Monitor > Wireless > AP Information > AP List > More Information
LABEL DESCRIPTION
Configuration
Status
This displays whether or not any of the AP’s configuration is in conflict with the ZyWALL/
USG’s settings for the AP.
Non Support If any of the AP’s configuration conflicts with the ZyWALL/USG’s settings for the AP, this
field displays which configuration conflicts. It displays n/a if none of the AP’s
configuration conflicts with the ZyWALL/USG’s settings for the AP.
Port Status
Port This shows the name of the physical Ethernet port on the ZyWALL/USG.
Status This field displays the current status of each physical port on the AP.
Down - The port is not connected.
Speed / Duplex - The port is connected. This field displays the port speed and duplex
setting (Full or Half).
PVID This shows the port’s PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port
so that the frames are forwarded to the VLAN group that the tag defines.
Up Time This field displays how long the physical port has been connected.
VLAN
Configuration
Name This shows the name of the VLAN.
Status This displays whether or not the VLAN is activated.
VID This shows the VLAN ID number.
Member This field displays the Ethernet port(s) that is a member of this VLAN.
Station Count
The y-axis represents the number of connected stations.
The x-axis shows the time over which a station was connected.
Last Update This field displays the date and time the information in the window was last updated.