Chapter 36 Content Filtering
ZyWALL/USG Series User’s Guide
628
36.3 Content Filter Profile Add or Edit Screen
Click Configuration > UTM > Content Filter > Profile > Add or Edit to open the Add Filter
Profile screen. Configure Category Service and Custom Service tabs.
36.3.1 Content Filter Add Profile Category Service
License Status This read-only field displays the status of your content-filtering database service
registration.
Not Licensed displays if you have not successfully registered and activated the
service.
Expired displays if your subscription to the service has expired.
Licensed displays if you have successfully registered the ZyWALL/USG and
activated the service.
You can view content filter reports after you register the ZyWALL/USG and
activate the subscription service in the Registration screen.
License Type This read-only field displays what kind of service registration you have for the
content-filtering database.
None displays if you have not successfully registered and activated the service.
Standard displays if you have successfully registered the ZyWALL/USG and
activated the service.
Trial displays if you have successfully registered the ZyWALL/USG and activated
the trial service subscription.
Expiration Date This field displays the date your service license expires.
Register Now This link appears if you have not registered for the service or the service has
expired. Click this link to go to the screen where you can register for the service.
Apply Click Apply to save your changes back to the ZyWALL/USG.
Reset Click Reset to return the screen to its last-saved settings.
Table 240 Configuration > UTM Profile > Content Filter > Profile (continued)
LABEL DESCRIPTION
To Next Page
Loading...
