ZyXEL Communications VPN Series - The Printer Status Screen

Chapter 7 Monitor
ZyWALL/USG Series User’s Guide
212
7.16 The Printer Status Screen
This screen displays information about the connected statement printer, such as SP350E. Click
Monitor > Printer Status to display this screen.
Figure 175 Monitor > Printer Status
The following table describes the labels in this screen.
MAC Address This indicates the detected device’s MAC address.
SSID Name This indicates the detected device’s SSID.
Channel ID This indicates the detected device’s channel ID.
802.11 Mode This indicates the 802.11 mode (a/b/g/n) transmitted by the detected device.
Security This indicates the encryption method (if any) used by the detected device.
Description This displays the detected device’s description. For more on managing friendly and rogue
APs, see the Configuration > Wireless > MON Mode screen.
Last Seen This indicates the last time the device was detected by the ZyWALL/USG.
Refresh Click this to refresh the items displayed on this page.
Table 65 Monitor > Wireless > Detected Device (continued)
LABEL DESCRIPTION
Table 66 Monitor > Printer Status
LABEL DESCRIPTION
# This is the index number of the printer in the list.
Registration This field shows that the printer is added to the managed printer list (Mgnt Printer).
IPv4 Address This field displays the IP address of the printer that you configured in the Configuration >
Hotspot > Printer Manager > General: Add screen.
Update Time This field displays the date and time the ZyWALL/USG last synchronized with the printer.
This shows n/a when the printer status is sync fail.
Status This field displays whether the ZyWALL/USG can connect to the printer and update the
printer information.
Description This field displays the descriptive name of the printer that you configured in the
Configuration > Hotspot > Printer Manager > General: Add screen.
Nickname This field displays the nickname of the printer that you configured in the Configuration >
Hotspot > Printer Manager > General: Edit screen.
Firmware
Version
This field displays the model number and firmware version of the printer.
This shows n/a when the printer status is sync fail.
MAC This field displays the MAC address of the printer.