ZyXEL Communications VPN Series - Page 232

Chapter 7 Monitor
ZyWALL/USG Series User’s Guide
232
Destination Address Type the IP ad re ss of the destination.
Destination Interface Select the destination interface from the pull down menu.
Keyword Type a keyword of the policy service available from
ZyWALL/USG to search for a
log.
Search Click this to start the search.
Email Log Now Click this button to send log message(s) to the Active e-mail address(es) specified
in the Send Log To field on the Log Settings page.
Refresh Click this button to update the information in the screen.
Clear Log Click this button to clear the whole log, regardless of what is currently displayed on
the screen.
# This field is a sequential value, and it is not associated with a specific log message.
Time This field displays the time the log message was recorded.
Priority This displays when you show the filter. Select the priority of log messages to
display. The log displays the log messages with this priority or higher. Choices are:
any, emerg, alert, crit, error, warn, notice, and info, from highest priority to
lowest priority. This field is read-only if the Category is Debug Log.
Category This field displays the log that generated the log message. It is the same value used
in the Display and (other) Category fields.
Message This field displays the message of the log.
Source Address This displays when you show the filter. Type the source IP address of the incoming
packet that generated the log message. Do not include the port in this filter.
Destination Address This displays when you show the filter. Type the IP address of the destination of the
incoming packet when the log message was generated. Do not include the port in
this filter.
Source Interface This displays when you show the filter. Select the source interface of the packet that
generated the log message.
Destination Interface This displays when you show the filter. Select the destination interface of the packet
that generated the log message.
Note This field displays any additional information about the log message.
LABEL DESCRIPTION