Chapter 19 DNS Inbound LB
ZyWALL/USG Series User’s Guide
432
Figure 305 Configuration > Network > DNS Inbound LB > Add/Edit > Add
The following table describes the labels in this screen.
Table 159 Configuration > Network > DNS Inbound LB > Add/Edit > Add/Edit
LABEL DESCRIPTION
Member The ZyWALL/USG checks each member interface’s loading in the order displayed
here.
Monitor Interface Select an interface to associate it with the DNS load balancing rule. This field also
displays whether the IP address is a static IP address (Static), dynamically assigned
(Dynamic) or obtained from a DHCP server (DHCP Client), as well as the IP address
and subnet mask.
Weight This field is available if you selected Weighted Round Robin for the load balancing
algorithm.
Specify the weight of the member interface. An interface with a larger weight gets
more chances to transmit traffic than an interface with a smaller weight.
IP Address
Same as Monitor
Interface
Select this to send the IP address displayed in the Monitor Interface field to the
DNS query senders.
Custom Select this and enter another IP address to send to the DNS query senders.
OK Click OK to save your changes back to the ZyWALL/USG.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
