ZyXEL Communications VPN Series - Page 442

Chapter 20 Web Authentication
ZyWALL/USG Series User’s Guide
442
Figure 314 Configuration > Object > Auth. method > Edit
3 Click Configuration > Web Authentication. In the Web Authentication > General screen,
select Enable Web Authentication to turn on the web authentication feature and click Apply.
Figure 315 Configuration > Web Authentication
4 In the Web Authentication Policy Summary section, click the Add icon to set up a default policy
that has priority over other policies and forces every user to log into the ZyWALL/USG before the
ZyWALL/USG routes traffic for them.
5 Select Enable Policy. Enter a descriptive name, “default_policy” for example. Set the
Authentication field to required, and make sure Force User Authentication is selected. Select
an authentication type profile (“default-web-portal” in this example). Keep the rest of the default
settings, and click OK.
Note: The users must log in at the Web Configurator login screen before they can use
HTTP or MSN.