Chapter 22 Printer Manager
ZyWALL/USG Series User’s Guide
482
Figure 336 Configuration > Hotspot > Printer Manager > General
The following table describes the labels in this screen.
Table 176 Configuration > Hotspot > Printer Manager > General
LABEL DESCRIPTION
General Setting
Enable Printer
Manager
Select the check box to allow the ZyWALL/USG to manage and monitor the printer status.
Printer Settings
Encryption Select the check box to turn on data encryption. Data transmitted between the ZyWALL/
USG and the printer will be encrypted with a secret key
Secret Key Enter four alphanumeric characters (A-Z, a-z, 0-9) to specify a key for data encryption.
Printer List Use this section to add the printer(s) that can be managed by the ZyWALL/USG.
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
To Next Page
Loading...
