ZyXEL Communications VPN Series - Page 491

Chapter 22 Printer Manager
ZyWALL/USG Series User’s Guide
491
Figure 344 System Status Example
The following table describes the labels in this report.
System Status
--------------------------------------
Item Description
--------------------------------------
SYST 02:02:35
WAST Link up
WLST Activate
FWVR 2.50(AACG.0)
BTVR 1.22
WAMA 00-90-0E-00-4A-29
LAMA 00-90-0E-00-4A-30
WAIP 10.21.2.267
LAIP 172.16.0.1
WLIP 10.59.1.1
DHSP 10.59.1.33
DHEP 10.59.1.254
--------------------------------------
CPUS 5%
MEMS 40%
DKST 5%
--------------------------------------
2012/04/12 17:10:22
---End---
Table 183 System Status
LABEL DESCRIPTION
SYST This field displays the time since the system was last restarted.
WAST This field displays the WAN connection status.
WLST This field displays the status of the ZyWALL/USG’s wireless LAN.
FWVR This field displays the version of the firmware on the ZyWALL/USG.
BTVR This field displays the version of the bootrom.
WAMA This field displays the MAC address of the ZyWALL/USG on the WAN.
LAMA This field displays the MAC address of the ZyWALL/USG on the LAN.
WAIP This field displays the IP address of the WAN port on the ZyWALL/USG.
LAIP This field displays the IP address of the LAN port on the ZyWALL/USG.
WLIP This field displays the IP address of the wireless LAN interface on the ZyWALL/USG.
DHSP This field displays the first of the continuous addresses in the IP address pool.
DHEP This field displays the end of the continuous addresses in the IP address pool.
CPUS This field displays the ZyWALL/USG’s recent CPU usage.
MEMS This field displays the ZyWALL/USG’s recent memory usage.
DKST This field displays what percentage of the ZyWALL/USG’s onboard flash memory is
currently being used.