Chapter 39 Anti-Spam
ZyWALL/USG Series User’s Guide
691
Figure 471 Configuration > UTM Profile > Anti-Spam > Black/White List > White List
The following table describes the labels in this screen.
Table 268 Configuration > UTM Profile > Anti-Spam > Black/White List > White List
LABEL DESCRIPTION
General Settings
Enable White List
Checking
Select this check box to have the ZyWALL/USG forward e-mail that matches (an
active) white list entry without doing any more anti-spam checking on that individual
e-mail.
White List X-Header Specify the name and value for the X-Header to be added to e-mails that match the
ZyWALL/USG’s spam white list.
Rule Summary
Add Click this to create a new entry. See Section 39.5.1 on page 689 for details.
Edit Select an entry and click this to be able to modify it. See Section 39.5.1 on page 689
for details.
Remove Select an entry and click this to delete it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the
entry is inactive.
# This is the entry’s index number in the list.
Type This field displays whether the entry is based on the e-mail’s subject, source or relay
IP address, source e-mail address, or a header.
Content This field displays the subject content, source or relay IP address, source e-mail
address, or header value for which the entry checks.
Apply Click Apply to save your changes back to the ZyWALL/USG.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
