ZyXEL Communications VPN Series - Page 751

Chapter 42 Object
ZyWALL/USG Series User’s Guide
751
42.3.2.4 Add/Edit Security Profile
This screen allows you to create a new security profile or edit an existing one. To access this screen,
click the Add button or select a security profile from the list and click the Edit button.
Note: This screen’s options change based on the Security Mode selected. Only the
default screen is displayed here.
Figure 511 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
The following table describes the labels in this screen.
Table 296 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL DESCRIPTION
Profile Name Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores
are allowed.
Security Mode Select a security mode from the list: wep, wpa, wpa2, or wpa2-mix.
Radius Server Type Select Internal to use the ZyWALL/USG’s internal authentication database, or External
to use an external RADIUS server for authentication.