Chapter 42 Object
ZyWALL/USG Series User’s Guide
762
42.5.1.1 Add Application Object by Category or Service
Click Add in Configuration > Object > Application > Application > Add Application Rule to
choose the signatures that should go into this object.
Figure 520 Configuration > Object > Application > Application > Add Application Rule > Add By
Category
Application This displays the name of the application signature used in this application rule.
OK Click OK to save your changes back to the ZyWALL/USG.
Cancel Click Cancel to exit this screen without saving your changes.
Table 303 Configuration > Object > Application > Application (continued)> Add Application Rule
LABEL DESCRIPTION
To Next Page
Loading...
