Chapter 42 Object
ZyWALL/USG Series User’s Guide
783
42.8.3.1 The Schedule Group Add/Edit Screen
The Schedule Group Add/Edit screen allows you to define a schedule group or edit an existing
one. To access this screen, go to the Schedule screen (see ), and click either the Add icon or an
Edit icon in the Schedule Group section.
Figure 539 Configuration > Schedule > Schedule Group > Add
The following table describes the fields in the above screen.
# This field is a sequential value, and it is not associated with a specific schedule.
Name This field displays the name of the schedule group, which is used to refer to the
schedule.
Description This field displays the decription of the schedule group.
Members This field lists the members in the schedule group. Each member is separated by
a comma.
Reference This displays the number of times an object reference is used in a profile.
Table 321 Configuration > Object > Schedule > Schedule Group
LABEL DESCRIPTION
Table 322 Configuration > Schedule > Schedule Group > Add
LABEL DESCRIPTION
Group Members
Name Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first character
cannot be a number. This value is case-sensitive.
Description Enter a description of the service group, if any. You can use up to 60 printable
ASCII characters.
To Next Page
Loading...
