Chapter 45 File Manager
ZyWALL/USG Series User’s Guide
906
After you see the Firmware Upload in Process screen, wait a few minutes before logging into the
ZyWALL/USG again.
Figure 638 Firmware Upload In Process
Note: The ZyWALL/USG automatically reboots after a successful upload.
The ZyWALL/USG automatically restarts causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 639 Network
After five minutes, log in again and check your new firmware version in the Dashboard screen.
If the upload was not successful, the following message appears in the status bar at the bottom of
the screen.
Figure 640 Firmware Upload Error
Version This is the firmware version and the date created.
Released Date This is the date that the version of the firmware was created.
Upgrade A cloud helper icon displays if there is a later firmware on the Cloud Server than the
firmware in the partition. Click the cloud helper icon to download a later firmware from
the Cloud Helper Server.
Use the local firmware icon if you have already downloaded the latest firmware from the
ZyXEL website to your computer and unzipped it.
Cloud Firmware
Information
You must register your ZyWALL/USG at myZyXEL.com first to use cloud firmware.
Latest Version This displays the latest firmware version at the Cloud Helper Server. Click Check Now to
see if there is a later firmware at the Cloud Server.
Release Date This displays the date the latest firmware version was made available.
Release Note The release note contains details of latest firmware version such as new features and bug
fixes.
Table 382 Maintenance > File Manager > Firmware Management (continued)
LABEL DESCRIPTION
To Next Page
Loading...
