Aanderaa ZPulse DCS 4420 - Page 130

Page 130 February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930
Appendix 1 Product change notification: Frame Work3
Copy of content in Product Change Notification Document ID: DA-50009-01 of date 09 December 2011:
Product(s) Affected:
Product
Number
Product Name
From Serial
No.
4050 Temperature Sensor 300
4060 Temperature Sensor 500
4017 Pressure Sensor 700
4117 Pressure Sensor 600
4319(A/B) Conductivity Sensor 800
4330(F/A) Oxygen Optode 1000
4420 ZPulse
®
Doppler Current Sensor 500
4520 ZPulse
®
Doppler Current Sensor 600
4646(R) Pressure Sensor 600
4647(R) Tide Sensor 600
4648(R) Wave and Tide Sensor 600
4830 ZPulse
®
Doppler Current Sensor 100
4835 Oxygen Optode 300
4930 ZPulse
®
Doppler Current Sensor 100
4880(R) Temperature Sensor 200
4930 ZPulse
®
Doppler Current Sensor 100
General Change Description:
Most of AADI’s Smart Sensors utilized common communication protocols for use at the RS-232 and RS-422 interface.
Two protocols are available; Smart Sensor Terminal protocol and the AADI Real Time protocol, where the Smart
Sensor Terminal protocol is a simple ASCII command string based protocol and the AADI Real Time is an XML based
protocol. To accommodate for higher security and future expansions both protocols will be updated when releasing
Sensor Framework version 3 (common software for the above sensors). This notification aim to give an overview of
the changes in the Smart Sensor Terminal protocol. Please refer to the specific Operating Manuals for further details
and to Technical Description TD267a for updates in the AADI Real Time protocol.