Page 98 February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930
Commands:
Do_SUBCMD<CRLF> = Execute SUBCMD
Get_PROPERTY<CRLF> = Output PROPERTY value.
Get_All<CRLF> = Output all property values.
Get_All Parameters<CRLF> = Output all parameter values.
Set_PROPERTY(V,..V)<CRLF> = Set PROPERTY to V,..V.
Set_Passkey(V)<CRLF> = Set Passkey.
Save<CRLF> = Store current settings.
Load<CRLF> = Load stored settings.
Reset<CRLF> = Reset node.
Stop<CRLF> = Stop measurement
Start<CRLF> = Start measurement
Help<CRLF> = Print help information.
Sub commands: Sample
Output
Argument list for enumerated properties:
Interface: RS232
Baudrate: 4800,9600,57600,115200
Flow Control: None, Xon/Xoff
Comm Timeout: Always On,10 s,20 s,30 s,1 min,2 min,5 min,10 min
Select 4100 Output Mode: Normal – Polar, Normal Rectangular, Comprehensive – Polar, Comprehensive –
Rectangular
Compass calibrated Orientation: Only Up, Only Down, Up and Down
Ping Number: 50,60,75,100,150,200,250,300,350,400,450,500,550,600
Polled Pingrate: 0.1, 0.5, 1.0, 2.0, 5.0, 10.0, 15.0, 20.0, 25.0
Start Distance: 0.40, 0.50, 0.60, 0.70, 0.80, 0.90, 1.00
Cell Size: 0.75, 0.90, 1.00, 1.10, 1.20, 1.30, 1.40, 1.50, 1.60, 1.70, 1.80, 1.90, 2.00
Activation X-axis: 1+3, 1, 3
Activation Y-axis: 2+4, 2, 4
Argument list for properties with default values:
Sound Speed: 1473.000000, 1500.000000, 1525.000000
To Next Page
Loading...