Section 7 I/O Displays PROFIBUS LAN Display
3BUR002418-600 A 169
PROFIBUS LAN Status Area
The PROFIBUS LAN status area represents the CI541 Interface as described below.
Name The controller subsystem part of the logical name created during
database configuration.
Lan This field represents the number of the Local Area Network (LAN)
for all the stations shown. For the AC 460 this is LAN # 1 - 4.
Go back to the controller display to select a different LAN.
Templet The logical device name created during database configuration is
given in this field.
Label Descriptive label associated with templet.
Mod/Sub This field represents the slot number of the of the controller carrier
MODule, and the SUBmodule location of the CI541.
Bus Address This is the field bus address assigned to the CI541.
State This field shows the status of the CI541 submodule.
ACTIVE indicates the submodule is in use.
FAILED means the submodule has stopped.
MISSING means there is not a submodule installed in this
location.
Speed This shows the PROFIBUS network Bus Speed (Kbit/sec) as
entered on the PRFI_LAN templet.
To Next Page
Loading...
