ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 15
Options
Validation
A validation unit can be installed in the beam path of the spectrometer to
confirm the validity of the spectrometer adjustment.
Total carbon measurement
A flame ionization detector (FID) for measurement of the total carbon con-
tent (VOC) can be incorporated into the analyzer system.
Display and signal processing
The current concentration of the individual measured components and the
status signals are shown on the system display.
The system controller has been designed for the requirements of emissions
and process measurement. It offers a system-internal CAN bus and field bus
systems such as Modbus and PROFIBUS as interfaces. An Ethernet interface
for remote monitoring of the entire analyzer system and transmitting data
via internal or external TCP/IP networks is included. Remote control of the
analyzer system is possible via a UMTS router. Analog outputs for the meas-
ured components and relay contacts for fault/status messages are optional.
To Next Page
Loading...
Need help?
General
