ABB ACF5000 User Manual

ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 83
Configuring the Automatic Drift Check (ADC)
Function
On the analyzer system, the cyclical drift check with automatically connected
test gases can be configured as an option. The "Automatic Drift Check"
function must be enabled in the configuration file.
Menu path
Menu → Configure → Adjustment Data → Automatic Drift Check
Display
Configuring gas port
Select the gas inlet that will connect to the test gas in the ADC menu and
press ENTER to call up inlet configuration.

ABB ACF5000 Specifications

General

Brand	ABB
Model	ACF5000
Category	Measuring Instruments
Language	English