ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 13
Safety instructions for working with poisonous gases
Some gas components whose concentration is measured with the analyzer
system are hazardous to health or poisonous.
For this reason, the sample gas must under no circumstances be allowed to
escape from the sample gas path in either the measurement mode or when
performing maintenance.
The analyzer system must be checked for leaks regularly.
The diluted stack gas must be discharged outside the room where the ana-
lyzer cabinet is installed.
Ensure adequate ventilation of the room in which the analyzer system is
installed.
The legal requirements for the maximum work place limit values of the
measurement and test gases must be observed.
To Next Page
Loading...
