136 ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A
Moving a display element within a page
Moving a display element within a page
1 Select Display menu item.
2 Select the display element in the display overview.
3 Select the Position parameter.
The nine possible positions are graphically represented.
4 If the display element is on a system side, its position can only be ex-
changed with that of another display element (the Swap Display
softkey is pressed).
If the display element is on user page, its position can either be ex-
changed with that of another display element (the softkey Swap
Display is pressed), or it can be moved to a free position (the softkey
Swap Display is not pressed).
Select the desired position with the corresponding number key.
5 Switch to measuring mode.
The display element is now displayed at the new position.
To Next Page
Loading...
