ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 123
Save configuration
Menu path
MENU → Configure → System → Save configuration
Automatic saving of the configuration
The database with the configuration data and logbook entries is saved au-
tomatically in two configuration files.
The database is always saved when changes are made to the parameters in
menu mode. The saving process takes place as soon as either the user has
deactivated an entered password by pressing the MEAS key twice or when
the analyzer system switches automatically to measuring mode using
"time-out".
When starting the analyzer system, the last valid configuration file saved is
loaded.
Save configuration manually
It is also possible to save the database manually. This makes sense, for in-
stance, for interim saving of a comprehensive function block configuration.
Backup
In addition to the automatic or manual saving of the configuration, it is pos-
sible to create a backup of the current configuration. This backup is archived
in a separate saving area and can be loaded when required, for instance in
order to reset the analyzer system to a defined status.
NOTICE
A backup of the current configuration on a separate data carrier can be cre-
ated with the use of the SMT light software tool. SMT light is on the
DVD-ROM “Software tools and technical documentation”, which is included
in the scope of delivery of the analyzer system.
To Next Page
Loading...
Need help?
General
