ABB ACF5000 - Configuration: System functions; Setting time zone, date and time

114 ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A
Configuration: System functions
Setting time zone, date and time
Menu path
MENU → Configure → System → Date/Time
Procedure
Parameter Explanation
Time zone
The time zone can be selected either from the list of GMT
values or from the list of continents/countries/cities.
Date
The date must be entered in the format Day.Month.Year, The
year must have four digits.
Time
The time must be entered in the format hour:minute:second.
The seconds must be entered.
Definitions
GMT = Greenwich Mean Time
CET = Central European Time = GMT + 1 hour
CEST = Central European Summer Time = GMT + 2 hours
Summer time
The analyzer system automatically switches to summer time.
Note: However, this applies only if the time zone is selected from one of the
lists of continents/countries/cities and not from the list of GMT values.
Delivery status
The analyzer system is set at the plant to the time zone GMT+1.
Assuming the time settings
To assume the changed time settings, the SET CLOCK softkey must be
pressed.