ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 135
Moving a display element from one page to another
Moving a display element from one page to another
1 Select Display menu item.
2 Select the display element in the display overview.
3 Select the Page parameter.
4 In the displayed page overview, select the target page. Only those pages
can be selected with an assignment < 100%, i.e. in which there is at least
one free position.
5 In the displayed parameter overview of the display element, the new
page and new position are displayed.
If the new page is a system page, the display element is located in the
first free position.
If the new page is a user page, the display element is located in the same
position as the old page, or if this is already taken, in position 8. If this is
also taken, the display element cannot be moved (display ––––).
6 If the new page is a user page and other positions are free, the position
of the display element can be changed.
Select the Position parameter.
The nine possible positions are graphically represented; free positions
are identified by the position number.
Select the desired position with the corresponding number key.
7 Switch to measuring mode.
The display element is now shown on the new page.
To Next Page
Loading...
Need help?
General
