ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 117
Blocking operation
Menu path
MENU → Configure → System → Changing Password
Blocking operation
The operation of the analyzer system, i.e. the calling up of the main menu
and therefore the switching to menu mode, can be protected with a pass-
word.
After blocking, the operation of the analyzer system is only possible once the
password has been entered for password level 1.
To configure the password protection, the password must be entered for
password level 3.
Procedure
In the Change password menu item, press the MENU ACCESS softkey and
make the desired password protection settings.
To Next Page
Loading...
