52 ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A
Message display
Message display functions
The blinking message display in the softkey line has the following functions:
It prompts for the STATUS MESSAGE key to be pressed whenever a status
message is present
It shows that a password is active.
It shows that the analyzer system is being controlled from a remote HMI.
It shows that an automatic calibration process is running in the analyzer
system.
Display of status messages
When a status message is generated by the Message Generator function
block, its short text is displayed on the message display as configured in the
function block. The Technical Information "Function blocks – Descriptions
and configuration" contains complete information on the individual function
blocks.
To Next Page
Loading...
Need help?
General
