ABB ACS880 N5700 Series - Page 268

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / real32Defines a safe speed reference value that is used with
supervision functions such as
• 12.3 AI supervision function
• 49.5 Communication loss action
• 50.2 FBA A comm loss func
• 50.32 FBA B comm loss func
• 58.14 Communication loss action.
Speed ref safe22.41
- / -Safe speed reference. For scaling, see parameter 46.1.-30000.00 ...
30000.00 rpm
0.00 rpm / real32Defines the speed reference for jogging function 1. For
more information on jogging, see page 85.
Jogging 1 ref22.42
- / -Speed reference for jogging function 1. For scaling, see
parameter 46.1.
-30000.00 ...
30000.00 rpm
0.00 rpm / real32Defines the speed reference for jogging function 2. For
more information on jogging, see page 85.
Jogging 2 ref22.43
- / -Speed reference for jogging function 2. For scaling, see
parameter 46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference source 1 (selected
by parameter 22.11 Speed ref1 source). See the control
chain diagram on page 647.
This parameter is read-only.
Speed reference act
1
22.81
- / -Value of reference source 1. For scaling, see parameter
46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference source 2 (selected
by parameter 22.12 Speed ref2 source). See the control
chain diagram on page 647.
This parameter is read-only.
Speed reference act
2
22.82
- / -Value of reference source 2. For scaling, see parameter
46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference after the
mathematical function applied by parameter 22.13
Speed ref1 function and reference 1/2 selection (22.14
Speed ref1/2 selection). See the control chain diagram
on page 647.
This parameter is read-only.
Speed reference act
3
22.83
- / -Speed reference after source selection. For scaling, see
parameter 46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference after application
of 1st speed additive (22.15 Speed additive 1 source).
See the control chain diagram on page 647.
This parameter is read-only.
Speed reference act
4
22.84
- / -Speed reference after additive 1. For scaling, see
parameter 46.1.
-30000.00 ...
30000.00 rpm
268 Parameters