ABB ACS880 N5700 Series - Page 269

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / real32Displays the value of speed reference after the
application of the speed share scaling factor (22.16
Speed share). See the control chain diagram on page
647.
This parameter is read-only.
Speed reference act
5
22.85
- / -Speed reference after speed share scaling. For scaling,
see parameter 46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference after application
of 2nd speed additive (22.17 Speed additive 2 source).
See the control chain diagram on page 647.
This parameter is read-only.
Speed reference act
6
22.86
- / -Speed reference after additive 2. For scaling, see
parameter 46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference before application
of critical speeds. See the control chain diagram on
page 648.
The value is received from 22.86 Speed reference act 6
unless overridden by
• any constant speed
• a jogging reference
• network control reference (see Terms and
abbreviations (page 18))
• control panel reference
• safe speed reference.
This parameter is read-only.
Speed reference act
7
22.87
- / -Speed reference before application of critical speeds.
For scaling, see parameter 46.1.
-30000.00 ...
30000.00 rpm
Parameters 269