ABB ACS880 N5700 Series - Page 331

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
6Action is taken whenever the absolute value of the
signal falls below its (absolute) low limit or rises above
its (absolute) high limit.
Abs both
No action / uint16Selects the action the drive takes when the value
monitored by signal supervision 3 exceeds its limits.
Note: This parameter does not affect the status
indicated by 32.1 Supervision status.
Supervision 3 action32.26
0No action taken.No action
1A warning (A8B2 Signal supervision 3) is generated.Warning
2The drive trips on 80B2 Signal supervision 3.Fault
3If running, the drive trips on 80B2 Signal supervision 3.Fault if running
Zero / uint32Selects the signal to be monitored by signal supervision
function 3.
For the available selections, see parameter 32.7
Supervision 1 signal.
Supervision 3 signal32.27
0.000 s / real32Defines a filter time constant for the signal monitored
by signal supervision 3.
Supervision 3 filter
time
32.28
1000 = 1 s / 1000 = 1
s
Signal filter time.0.000 ... 30.000 s
0.00 / real32Defines the lower limit for signal supervision 3.Supervision 3 low32.29
- / -Low limit.-21474830.00 ...
21474830.00
0.00 / real32Defines the upper limit for signal supervision 3.Supervision 3 high32.30
- / -Upper limit.-21474830.00 ...
21474830.00
Parameters 331