ABB ACSM1 - Page 476

Appendix C – Homing methods
476
Homing method 26
1 If the state of the home switch is 0 (par. 62.04 HOME SWITCH TRIG): Start in the positive (right)
direction by the rising edge of the signal selected by par. 62.03 HOMING START with homing
speed 1, par. 62.07 HOMING SPEEDREF1.
2 Stop by the falling edge of the home switch signal selected by par. 62.04 HOME SWITCH TRIG.
1
2
Homing method 26
Homing start (par. 62.03)
Home switch (par. 62.04)
1 If the state of the home switch is 1: (par. 62.04 HOME SWITCH TRIG): Start in the positive
(right) direction by the rising edge of the signal selected by par. 62.03 HOMING START with
homing speed 1, par. 62.07 HOMING SPEEDREF1.
2 Stop by the falling edge of the home switch signal selected by par. 62.04 HOME SWITCH TRIG.
1
2
Homing method 26
Homing start (par. 62.03)
Home switch (par. 62.04)