ABB Advant Controller 450 User Manual

Advant
®
Controller 450 User’s Guide
Section I.3 List of System Messages and Corrective Actions
3BSE 002 415R701 Rev A I-9
Table I-8. Type 20, Code 1
Type Code Significance Task Comments/Actions
20 1 No contact with printer,
terminal and external
computer
CXBH260
CXBH261
CXBH262
CXBH263
CXBH264
Printer
MasterView 320 no 1
MasterView 320 no 2
MasterView 320 no 3
MasterView 320 no 4
Connected unit has the voltage disconnected.
Cable not connected.
XON-signal not generated from the unit connected.
Fault in signal transmission, e.g. modem or cable.
06:03:54 20 1 CXBH260 H’000000B8
Type 20 Error on V24 / RS-232-C Channel
H’00020609
H’0000008211
1

ABB Advant Controller 450 Specifications

General

Brand	ABB
Model	Advant Controller 450
Category	Controller
Language	English