ABB DCS550 - Page 182

182
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e
Signal / Parameter name
min.
max.
def.
unit
10.03 Reset (Reset command)
Binary signal for
Reset, UsedMCW (7.04) bit 7:
0 =
NotUsed
1 =
DI1 Reset by rising edge (0 → 1)
2 =
DI2 Reset by rising edge (0 → 1)
3 =
DI3 Reset by rising edge (0 → 1)
4 =
DI4 Reset by rising edge (0 → 1)
5 =
DI5 Reset by rising edge (0 → 1)
6 =
DI6 Reset by rising edge (0 → 1), default
7 =
DI7 Reset by rising edge (0 → 1)
8 =
DI8 Reset by rising edge (0 → 1)
9 =
DI9 Reset by rising edge (0 → 1), only available with digital extension board
10 =
DI10 Reset by rising edge (0 → 1), only available with digital extension board
11 =
DI11 Reset by rising edge (0 → 1), only available with digital extension board
12 =
MCW Bit11 Reset by rising edge (0 → 1), MainCtrlWord (7.01) bit 11
13 =
MCW Bit12 Reset by rising edge (0 → 1), MainCtrlWord (7.01) bit 12
14 =
MCW Bit13 Reset by rising edge (0 → 1), MainCtrlWord (7.01) bit 13
15 =
MCW Bit14 Reset by rising edge (0 → 1), MainCtrlWord (7.01) bit 14
16 =
MCW Bit15 Reset by rising edge (0 → 1), MainCtrlWord (7.01) bit 15
Int. Scaling: 1 == 1 Type: C Volatile: N
NotUsed
MCW Bit15
DI6
-
10.04 - 10.05 Unused
10.06 MotFanAck (motor fan acknowledge)
The drive trips with
F523 ExtFanAck [FaultWord2 (9.02) bit 6] if a digital input for an external fan is selected
and the acknowledge is missing for 10 seconds:
0 =
NotUsed
1 =
DI1 1= acknowledge OK, 0 = no acknowledge
2 =
DI2 1= acknowledge OK, 0 = no acknowledge, default
3 =
DI3 1= acknowledge OK, 0 = no acknowledge
4 =
DI4 1= acknowledge OK, 0 = no acknowledge
5 =
DI5 1= acknowledge OK, 0 = no acknowledge
6 =
DI6 1= acknowledge OK, 0 = no acknowledge
7 =
DI7 1= acknowledge OK, 0 = no acknowledge
8 =
DI8 1= acknowledge OK, 0 = no acknowledge
9 =
DI9 1= acknowledge OK, 0 = no acknowledge, only available with digital extension board
10 =
DI10 1= acknowledge OK, 0 = no acknowledge, only available with digital extension board
11 =
DI11 1= acknowledge OK, 0 = no acknowledge, only available with digital extension board
Int. Scaling: 1 == 1 Type: C Volatile: N
NotUsed
DI11
DI2
-